Sign up for e-Xpress
Our e-newsletter - e-Xpress delivers the latest news from Lorient straight to your inbox, including project case studies, certification news, regulatory updates and much more.
Unsubscribe information
If you wish to unsubscribe at any time, simply click on the 'unsubscribe' link at the bottom of the e-newsletter. Alternatively, you can email mktg@lorientuk.com with 'unsubscribe' in the subject line.
Lorient Polyproducts Ltd
Endeavour House
Fairfax Road
Heathfield Ind Est
Newton Abbot
Devon TQ12 6UD
United Kingdom
Tel: +44 (0) 1626 834252
Fax: +44 (0) 1626 833166
salesenquiries@lorientuk.com
Registered Office: Fairfax Road, Heathfield, Newton Abbot
Registered In England No. 1441058
Cassette Type Damper - LVHCTD
Relevant Downloads
- Fire Resistant Dampers/Air Transfer Grilles brochure
- LVHCTD - Cassette Type Damper
- Lorient Intumescent Sealant
You will need Adobe Acrobat Reader to read these documents.
Lorient’s Cassette Type Damper allows simple and rapid duct installation in small spaces, along with excellent access during commissioning and servicing.
- Sliding cold smoke shutter module allows easy access for servicing
- Easy installation of damper into fire compartment boundary
- Shutter plates tolerate a pressure differential of 300Pa
- Low cold smoke leakage rates
- May be used purely as a cold smoke damper by excluding the fire damper
- The sliding cold smoke containment shutter module allows easy removal of the entire plate and actuator assembly during servicing without affecting the fire stopping performance of the fire damper.
This system has been designed to control up to16 damper/shutter assemblies from one centralised, status monitoring unit.
- It is fail-safe – the dampers/shutters automatically close in event of an alarm, power failure or wire damage
- Resets automatically – when alarm is cancelled or power restored
- Self-testing – every 24 hours the dampers/shutters are automatically closed and opened to ensure they are working, dislodging any dust/debris
- Continuously monitors status of each damper/shutter and displays this on the DCM
- Easy and quick to install – simple loop wiring used and the damper/shutter units are supplied ready assembled and tested
- Controlled by ‘Talkback’ system giving status data and auto-cycling
- Can incorporate either LVH44 or LVH54 fire dampers - LVH54 fire damper will give at least 240 minutes fire resistance and 30 minutes insulation or an LVH44 will provide a more modest fire resistance period.
For further information please download the Cassette Type Damper datasheet and ATG brochure or for technical advice please contact our ATG department on 01626 834252.